BioTrax

The first unified genomic track, peak, and sequence retrieval tool.

One Python package and MCP server to discover, describe, and download data from ENCODE, ChIP-Atlas, ReMap, GEO, and SRA/ENA — with unified metadata, resolved DOI/PMID provenance, and ready-to-run pipeline outputs (nf-core/rnaseq samplesheets, RBP-RELI/TF-RELI library indexes).

No existing tool unifies peak/track retrieval from all five sources behind one interface. BioTrax fills that gap and goes further: it is also a better sra-prefetch, pulling FASTQs directly from ENA with md5 verification and no SRA-toolkit dependency.

---

What problem it solves

Before BioTrax	With BioTrax
5 different APIs and 5 scripts	biotrax search-tracks --target QKI --assay eCLIP
sra-prefetch + fasterq-dump setup required	Direct ENA FASTQ download, no SRA toolkit
Manual nf-core samplesheet creation	Auto-generated from any SRA/GEO accession
No DOI/PMID linkage on downloaded files	Every leaf folder has metadata.json + README.md + resolved DOI
RELI peak library built by hand	make_reli_index exporter from any peak pull
"What did I download and from where?"	Append-only master index TSV across all downloads

---

Sources

Source	Data	Capabilities
ENCODE	All assays: eCLIP, ChIP-seq, ATAC-seq, DNase-seq, RNA-seq, Hi-C, ...	search, list_files, doi_resolve, design_note
ChIP-Atlas	Assembled TF/histone ChIP-seq + ATAC-seq peak BEDs (merged from all public experiments)	search, list_files
ReMap	Curated TF ChIP-seq peaks — primary TF-RELI library source (human hg38)	search, list_files
GEO	Supplementary track/peak files (BED, BigWig, narrowPeak) with rich series provenance	search, list_files, doi_resolve, design_note
SRA/ENA	Sequencing reads — any strategy (RNA-seq, ChIP-seq, ATAC-seq, ...)	search, list_runs, doi_resolve, design_note

---

Install

# From source (recommended while pre-release):
pip install -e E:/Claude/BioTrax

# With uvx (runs without permanent install):
uvx --from E:/Claude/BioTrax biotrax list-sources

# Once published to PyPI:
pip install biotrax

Python >= 3.10 required. Dependencies: httpx>=0.27, fastmcp>=0.4.

---

MCP server (Claude / AI agents)

Add to Claude Code

claude mcp add biotrax -- E:\Claude\BioTrax\.venv\Scripts\python.exe E:\Claude\BioTrax\biotrax\server.py

Run manually (stdio transport)

E:\Claude\BioTrax\.venv\Scripts\python.exe E:\Claude\BioTrax\biotrax\server.py

Available MCP tools

Tool	What it does
search_tracks	Search ENCODE, ChIP-Atlas, ReMap, GEO for peak/track datasets
list_track_files	List downloadable files for one dataset (with direct URLs)
get_dataset	Fetch full metadata for one dataset by accession
download_tracks	Download files to disk; writes manifest + metadata + README
list_sources	Introspect all sources, capabilities, and filter keys
search_runs	Search SRA/ENA for sequencing experiments
download_fastq	Resolve accessions, download FASTQs, emit nf-core samplesheet
make_rnaseq_samplesheet	Build nf-core/rnaseq samplesheet from SeqRun dicts
make_reli_index	Build RBP-RELI / TF-RELI library index from downloaded BED files

---

CLI usage

# Search ENCODE for QKI eCLIP datasets (GRCh38, human default)
biotrax search-tracks --target QKI --assay eCLIP --sources ENCODE

# List peak files for an ENCODE experiment
biotrax list-files --source ENCODE --id ENCSR366YOG --output-type peaks

# Get full metadata (DOI, design note, file count)
biotrax get-dataset --source GEO --id GSE78509

# Search ChIP-Atlas for CTCF hg38 assembled peaks
biotrax search-tracks --target CTCF --sources ChIP-Atlas --genome GRCh38

# Search ReMap for all CTCF ChIP-seq datasets
biotrax search-tracks --target CTCF --sources ReMap

# Download FASTQs from an SRA study + write nf-core samplesheet
biotrax download-fastq --accessions SRP123456 --strandedness reverse

# Download FASTQs from a GEO series
biotrax download-fastq --accessions GSE151511

# Resolve a single SRR run
biotrax search-runs --raw-query tax_eq(9606) --limit 5

# List all sources and their filter keys
biotrax list-sources

---

Python library usage

from biotrax.sources.encode import ENCODEAdapter

adapter = ENCODEAdapter()

# Search for QKI eCLIP datasets
datasets = adapter.search(target="QKI", assay="eCLIP", genome="GRCh38")
# Returns: [Dataset(dataset_id='ENCSR366YOG', target='QKI', biosample='K562', ...),
#           Dataset(dataset_id='ENCSR570WLM', target='QKI', biosample='HepG2', ...)]

# Get full metadata including DOI
ds = adapter.get_dataset("ENCSR366YOG")
# ds.publication_doi -> "10.1038/s41586-020-2077-3"
# ds.pmid            -> "32728246"
# ds.design_note     -> "eCLIP, QKI, K562 experiment from ENCODE. ..."

# List peak files with direct download URLs
files = adapter.list_files(ds, output_type="peaks")
# files[0].url -> "https://www.encodeproject.org/files/ENCFF786UOW/@@download/..."
# files[0].file_format -> "bed"
# files[0].md5 -> "..."

from biotrax.sources.sra_ena import SRAENAAdapter
from biotrax.exporters.nfcore_rnaseq import write_nfcore_samplesheet

adapter = SRAENAAdapter()

# Resolve a GSE to runs with ENA FASTQ URLs (no SRA toolkit needed)
runs = adapter.list_runs("GSE151511")
# runs[0].run_accession -> "SRR12345678"
# runs[0].fastq_urls    -> ["https://ftp.sra.ebi.ac.uk/...R1.fastq.gz", ...]
# runs[0].fastq_md5     -> ["abc123...", ...]
# runs[0].library_layout -> "PAIRED"

# Write nf-core/rnaseq samplesheet
write_nfcore_samplesheet(runs, "samplesheet.csv", strandedness="reverse")

from biotrax.sources.geo import GEOAdapter

adapter = GEOAdapter()

# Fetch a GEO series with provenance
datasets = adapter.search(filters={"gse": "GSE78509"})
ds = datasets[0]
# ds.pmid             -> "27068461"
# ds.publication_doi  -> "10.1016/j.celrep.2016.03.052"
# ds.design_note      -> "This SuperSeries is composed of..."

# List supplementary track files (BED, BigWig, narrowPeak)
files = adapter.list_files(ds)
# -> 37 TrackFile objects with HTTPS download URLs

from biotrax.sources.remap import RemapAdapter

adapter = RemapAdapter()
datasets = adapter.search(target="CTCF", organism="Homo sapiens")
# datasets[0].n_files -> 629  (1 bulk BED + 628 per-experiment BEDs)
# datasets[0].publication_doi -> "10.1093/nar/gkab996"

files = adapter.list_files(datasets[0])
# files[0].url -> "http://remap.univ-amu.fr/storage/remap2022/hg38/MACS2/TF/CTCF/..."

from biotrax.exporters.reli_index import write_reli_index, write_reli_index_annotated
from pathlib import Path

# Build RBP-RELI / TF-RELI library index from downloaded peak BEDs
write_reli_index(track_files, local_paths, "CLIPseq.my_run.index")
# Output (tab-delimited, no header, two columns):
#   QKI_K562_ENCODE_ENCFF786UOW    /path/to/ENCFF786UOW.bed.gz
#   CTCF_K562_ENCODE_ENCFF001XYZ   /path/to/ENCFF001XYZ.bed.gz

---

Download layout

Files land in a self-describing, deterministic hierarchy under F:\BioTrax\:

F:\BioTrax\
  ENCODE\GRCh38\QKI__eCLIP__K562__ENCSR366YOG\
      ENCFF786UOW.bed.gz
      manifest.tsv          <- file-level: filename, url, md5, size_bytes, format
      metadata.json         <- full Dataset: DOI, PMID, design_note, all fields
      README.md             <- human-readable per-dataset summary

  ChIP-Atlas\GRCh38\TFs-and-others__CTCF__All-cell-types__05__hg38\
      Oth.ALL.05.CTCF.AllCell.bed
      manifest.tsv
      metadata.json
      README.md

  SRA-ENA\SRP123456\SRR12345678\
      SRR12345678_1.fastq.gz
      SRR12345678_2.fastq.gz
      manifest.tsv
      metadata.json
      README.md

  GEO\GSE78509__IGF2BP1-H9ES-eCLIP\
      GSM2071742_IGF2BP1_H9ES_Rep1_eCLIP.InputNormalizedPeaks.bed.gz
      manifest.tsv
      metadata.json
      README.md

  _index\
      biotrax_downloads_index.tsv   <- append-only master log of all downloads

Slug rule (deterministic, documented): spaces/slashes replaced with -; consecutive - collapsed; leading/trailing - stripped; truncated at 80 chars. Logical compound names use __ (double underscore) as separator so single underscores in gene names (e.g. QKI_5) survive unchanged.

---

Unified schema

Dataset(
    source,           # "ENCODE" | "ChIP-Atlas" | "ReMap" | "GEO" | "SRA-ENA"
    dataset_id,       # primary accession (ENCSR000AKW, GSE12345, remap2022_CTCF_hg38)
    target,           # protein/antigen (e.g. "QKI", "CTCF") — None for GEO series
    assay,            # assay type (e.g. "eCLIP", "ChIP-seq", "RNA-seq")
    biosample,        # cell line / tissue (e.g. "K562", "HepG2")
    organism,         # defaults "Homo sapiens"
    genome,           # normalized assembly (e.g. "GRCh38") — default
    n_files,          # count of downloadable files (0 = unknown)
    publication_doi,  # resolved DOI (None if not found — never fabricated)
    pmid,             # PubMed ID
    design_note,      # <=2-sentence human-readable experiment setup
    source_url,       # canonical portal URL
    retrieved,        # ISO date of when BioTrax fetched this record
    extra,            # source-specific dict (never fabricated)
    ignored_filters,  # filter keys this source could not apply (transparency)
)

TrackFile(
    source, dataset_id, file_id,
    target, assay, biosample, genome,
    output_type,      # "peaks" | "signal" | "IDR thresholded peaks" | ...
    file_format,      # "bed" | "narrowPeak" | "bigBed" | "bigWig" | ...
    url,              # direct download URL (HTTPS)
    size,             # bytes (when available)
    md5,              # expected md5 (when available)
    parent,           # back-reference to owning Dataset
)

SeqRun(
    run_accession,    # e.g. SRR12345678
    study,            # SRP / PRJNA accession
    sample,           # SRS / SAMN accession
    library_strategy, # "RNA-Seq" | "ChIP-Seq" | "ATAC-seq" | ...
    library_layout,   # "PAIRED" | "SINGLE"
    instrument,       # e.g. "Illumina NovaSeq 6000"
    read_count,       # total reads
    organism,         # defaults "Homo sapiens"
    fastq_urls,       # ENA HTTPS FASTQ URLs [R1, R2] or [SE]
    fastq_md5,        # parallel md5 list
    parent,           # back-reference to owning Dataset
)

---

Pipeline exporters

from biotrax.exporters.nfcore_rnaseq import write_nfcore_samplesheet
from biotrax.exporters.reli_index import write_reli_index, write_reli_index_annotated
from biotrax.exporters.worksheet import write_worksheet
from biotrax.exporters.descriptor import write_dataset_readme, write_set_readme

# nf-core/rnaseq samplesheet from SRA runs
# Columns: sample, fastq_1, fastq_2, strandedness
write_nfcore_samplesheet(runs, "samplesheet.csv", strandedness="reverse")

# Minimal RELI binary-compatible index (2-column, tab-delimited, no header)
write_reli_index(track_files, local_paths, "CLIPseq.my_run.index")

# Annotated RELI index with provenance columns
write_reli_index_annotated(track_files, local_paths, "CLIPseq.my_run.index.annotated.tsv")

# Generic tidy sample worksheet (TSV or CSV)
write_worksheet(datasets, track_files=files, out_path="results.tsv")

---

Flexible filtering

Every source exposes a filters dict for source-specific constraints. Unrecognized keys are reported in Dataset.ignored_filters — never silently dropped.

# ENCODE-specific filters
datasets = adapter.search(
    target="QKI",
    filters={
        "assay_title": "eCLIP",          # exact ENCODE assay_title
        "lab": "Gene Yeo, UCSD",         # lab filter
        "status": "released",            # experiment status
        "date_released": "2020-01-01",   # released on or after
    }
)

# GEO-specific filters
datasets = geo_adapter.search(
    filters={
        "gse": "GSE78509",               # exact accession lookup
        "supplementary_file_type": "BW", # require BigWig supplementary
        "date_from": "2018/01/01",
        "min_samples": 4,
    }
)

# ChIP-Atlas-specific filters
datasets = chipatlas_adapter.search(
    target="CTCF",
    filters={
        "antigen_class": "TFs and others",
        "cell_type_class": "Blood",
        "threshold": "10",               # MACS2 q-value threshold (05/10/20)
    }
)

# SRA/ENA-specific filters
datasets = sra_adapter.search(
    filters={
        "library_strategy": "RNA-Seq",
        "library_layout": "PAIRED",
        "min_read_count": 10000000,
    }
)

Use biotrax list-sources (CLI) or the list_sources() MCP tool to see all filter keys per source.

---

Contributing: add a source adapter

BioTrax is architected so each source is an isolated, independently testable module. Adding a new source takes four steps:

1. Create biotrax/sources/myadapter.py

from biotrax.sources.base import SourceAdapter
from biotrax.core import Dataset, TrackFile

class MyAdapter(SourceAdapter):
    name = "MySource"
    description = "One-line description of the source."
    supported_filters = ["filter_key_1", "filter_key_2"]
    capabilities = {"search", "list_files", "download"}

    def search(self, target=None, assay=None, biosample=None,
               genome="GRCh38", organism="Homo sapiens",
               filters=None, raw_query=None, limit=50):
        filters = filters or {}
        ignored = self._extract_ignored(filters, self.supported_filters)
        # ... call your API, build Dataset objects ...
        return datasets   # list[Dataset]

    def list_files(self, dataset_or_id, *, output_type=None,
                   file_format=None, genome="GRCh38"):
        acc = self._dataset_id(dataset_or_id)
        # ... fetch file list, build TrackFile objects ...
        return track_files  # list[TrackFile]

2. Set name, description, supported_filters, capabilities

The supported_filters list tells list_sources() (and AI agents) exactly what filter keys this source understands. Any key in filters not in this list is automatically collected into ignored_filters via self._extract_ignored() — the transparency protocol.

3. Register in biotrax/server.py

from biotrax.sources.myadapter import MyAdapter

_PEAK_ADAPTERS["MySource"] = MyAdapter   # or _ALL_ADAPTERS for seq sources

4. Add live-API tests in tests/test_myadapter.py

Use pytest -k myadapter to run only your tests. Follow the pattern in tests/test_base_adapter.py for the ABC contract and tests/test_exporters.py for exporter tests.

Anti-hallucination rule: verify against the live API before merging. If the API can't deliver something cleanly, document the caveat in the adapter docstring — never fabricate results.

---

Defaults

• Genome: GRCh38 (alias "hg38" accepted everywhere)
• Organism: Homo sapiens
• Download root: F:\BioTrax
• Output type default: peaks (for peak sources)
• Strandedness default: "auto" (for nf-core samplesheets)

---

License

MIT — see LICENSE.

---

Citation

If BioTrax is useful to your work, please also cite the databases it queries:

• ENCODE: ENCODE Project Consortium (2012) Nature 489:57-74
• ChIP-Atlas: Oki et al. (2018) NAR [doi:10.1093/nar/gky488]; Oki et al. (2024) NAR [doi:10.1093/nar/gkae358]
• ReMap: Hammal et al. (2022) NAR [doi:10.1093/nar/gkab996]
• GEO: Barrett et al. (2013) NAR [doi:10.1093/nar/gks1193]
• ENA/SRA: Leinonen et al. (2011) NAR [doi:10.1093/nar/gkq967]