dolphin-anty-mcp

An MCP server for the Dolphin{anty} anti-detect browser, built from its public OpenAPI document (v1.0.7).

71 tools covering browser profiles, proxies, folders, statuses, fingerprints, cookies, local storage, extensions, homepages, bookmarks and team management — plus page-level automation that drives the Anty browser over the DevTools protocol, and a raw-request escape hatch for anything not modelled explicitly.

Setup

npm install && npm run build

Generate a JWT at https://dolphin-anty.com/panel/index.html#/api. It is shown once, so copy it before closing the page.

Register the server with your MCP client:

{
  "mcpServers": {
    "dolphin-anty": {
      "command": "node",
      "args": ["C:/Users/meow/Documents/Dolphin/dist/index.js"],
      "env": { "DOLPHIN_API_TOKEN": "your-jwt-here" }
    }
  }
}

Variable	Default	Purpose
DOLPHIN_API_TOKEN	—	JWT for the remote APIs. Without it only Local API tools work.
DOLPHIN_LOCAL_API_URL	http://localhost:3001	Local API origin.
DOLPHIN_TIMEOUT_MS	60000	Per-request timeout.

If port 3001 was busy when Dolphin started, it silently picks the next free port. Check Settings → Health in the app and set DOLPHIN_LOCAL_API_URL to match.

The two APIs

This matters more than anything else in the setup:

• Remote — profiles, proxies, folders, statuses, fingerprints, remote cookies. Works from anywhere with a valid JWT.
• Local — start_profile, stop_profile, cookie robot, local storage. Only answers while the Dolphin{anty} desktop app is running on the same machine, bound to loopback.

Three remote hosts are involved (dolphin-anty-api.com, apiv2.…/api/v2, darkwing.…/api/v1); each tool is pinned to the right one, so you never pick.

Using a profile by name

People say "spin up jannytest", not "start profile 832201155". start_profile and stop_profile therefore accept name and resolve it themselves:

{ "name": "jannytest", "automation": true }

This exists because the obvious design failed in practice. Every lifecycle endpoint is keyed by numeric id, so the only tool that took a profile name was create_profile — and a model handed a name followed the path of least resistance and created a duplicate, silently losing the cookies, logins and history the user actually wanted.

Three things close that off:

• start_profile / stop_profile take name and report the id they resolved.
• create_profile refuses a name that already exists, naming the existing id and pointing at start_profile. Override with allowDuplicateName: true when a separate profile really is intended.
• An unresolvable name fails loudly and says not to create a replacement, instead of quietly producing one.

Driving the browser

create_profile      → coherent fingerprint attached automatically
start_profile       → automation endpoint cached; browser_* tools attach on their own
browser_snapshot    → see the page as an accessibility tree
browser_click/type  → act on it
stop_profile        → syncs the data directory back to the cloud

Skipping stop_profile leaves the session's cookies and storage unsynced.

Targeting. browser_snapshot prints lines like button "Log in" — the role and quoted name are exactly what target takes:

{ "profileId": 123, "target": { "role": "button", "name": "Log in" } }

Fall back to text, label, placeholder, testId or raw css; add nth when several match. There are no opaque element refs to keep in sync, because ariaSnapshot({ ref: true }) does not actually emit them in playwright-core 1.62 — role+name is what the snapshot gives you, so it is what the tools consume.

Snapshot first, act second. browser_screenshot exists but costs far more context; reach for it only when the visual rendering itself matters.

Tabs

browser_tabs lists, opens, switches and closes tabs. Every other browser tool also takes a tabIndex.

{ "profileId": 123, "action": "list" }                      → [0] Inbox — https://…
{ "profileId": 123, "action": "select", "index": 1 }        → switch for good
{ "profileId": 123, "action": "new", "url": "https://…" }
{ "profileId": 123, "action": "close", "index": 1 }

The two are deliberately different. action: "select" changes the active tab for every later call; tabIndex acts on one tab for a single call and leaves the active tab alone. That split matters — a read-only browser_snapshot { tabIndex: 2 } silently redirecting all subsequent clicks to tab 2 is the kind of thing a model never recovers from.

Popups are reported on the action that caused them. A target="_blank" link leaves the current page looking unchanged, so a click that spawns a tab appends:

🔗 1 new tab(s) opened — the snapshot above is still the original tab:
  [1] https://example.com/b
Use browser_tabs { action: "select", index: 1 } to switch to it, or pass tabIndex to peek.

The new tab is not auto-selected — the model is told and decides. Detection uses the context's page event rather than comparing tab counts, because the popup registers a moment after the click resolves and a count check races it.

CAPTCHAs and human handoff

The server detects human-verification challenges and stops. It does not solve or bypass them — automated attempts fail and get the profile flagged.

Every navigation, click and snapshot is checked for reCAPTCHA, hCaptcha, Cloudflare Turnstile and its interstitial, Arkose/FunCaptcha, DataDome, PerimeterX, GeeTest, and generic "verify you are human" text. When one is found the tool result carries an explicit instruction:

⚠️ HUMAN VERIFICATION DETECTED: reCAPTCHA (widget present and visible on the page).
Do NOT try to solve, click or type your way through this … Call `browser_await_human` …

browser_await_human brings the window to the front, shows the operator your reason, and blocks until the challenge clears — then returns a fresh snapshot so the run continues. It also covers login walls, 2FA/OTP prompts, SMS codes and payment steps.

{ "profileId": 123, "reason": "Solve the reCAPTCHA on the login page", "timeoutSeconds": 300 }

Two things make this reliable with weaker models. The instruction is embedded in the tool output, where a model that has just walked into a captcha will actually read it, rather than only in a description it saw once. And on timeout the tool says "ask the operator, do not loop" instead of returning something retryable.

Where the host supports MCP elicitation, the operator gets a real prompt and confirms when done. Where it does not — most harnesses today — the tool falls back to polling the page, so the behavior is the same either way. until accepts challengeGone (default), urlChanged, textPresent, textGone, or manual.

Handoff requires a headed profile; the tool refuses immediately on a headless one rather than blocking on a window nobody can see.

Connecting your own client instead

const url = `ws://127.0.0.1:${port}${wsEndpoint}`;
await chromium.connectOverCDP(url);                    // Playwright
await puppeteer.connect({ browserWSEndpoint: url });   // Puppeteer

Both fields are needed. The OpenAPI document describes wsEndpoint as a full ws:// URL, but a live build returns a bare path — see below.

The MCP resource dolphin://guide/automation carries the full workflow, including hand-tuning a fingerprint instead of letting create_profile do it.

Fingerprints

Dolphin does not generate fingerprints server-side, and an incoherent one defeats the point of an anti-detect browser. create_profile therefore pulls a real fingerprint from Dolphin's dataset and attaches it by default. Pass your own fingerprint object (from get_fingerprint) to override, or autoFingerprint: false to send none.

One asymmetry worth knowing: create_profiles_bulk ignores a nested fingerprint object. Bulk creation needs the fields flattened to the top level (useragent, uaFullVersion, screenWidth, cpu, webglInfo, …). The tool description repeats this.

Tools

Group	Tools
Profiles	list_profiles list_profiles_cursor get_profile create_profile create_profiles_bulk update_profile delete_profiles transfer_profiles share_profile_access
Lifecycle	start_profile start_temporary_profile stop_profile local_api_login
Proxies	list_proxies create_proxy update_proxy delete_proxy
Folders	list_folders create_folder update_folder delete_folder get_folder_profile_ids move_profiles_to_folder reorder_folders
Statuses	list_statuses create_status update_status delete_statuses assign_status
Fingerprints	get_fingerprint get_useragent list_webgl list_fonts
Cookies	export_cookies import_cookies export_cookies_local import_cookies_local run_cookie_robot stop_cookie_robot
Local storage	export_local_storage import_local_storage
Extensions	list_extensions add_extension delete_extensions
Homepages	list_homepages create_homepages update_homepage delete_homepages
Bookmarks	list_bookmarks create_bookmark update_bookmark delete_bookmarks
Team	list_team_users create_team_user update_team_user delete_team_user
Browser	browser_await_human browser_connect browser_disconnect browser_navigate browser_snapshot browser_screenshot browser_click browser_type browser_select_option browser_press_key browser_scroll browser_wait_for browser_evaluate browser_tabs
Escape hatch	dolphin_request

Deletes and transfers carry destructiveHint annotations, so clients that gate on those will prompt before running them.

Some tools collapse several endpoints where the API split them arbitrarily: delete_profiles routes single-id deletes through the per-profile endpoint (the only one that accepts a profile password), move_profiles_to_folder attaches or detaches depending on whether you pass a folderId, and assign_status either references an existing status or creates one inline.

Error handling

HTTP status codes get translated into something actionable rather than surfaced as bare numbers:

Code	Meaning
401	JWT missing or expired
402	Paid-plan feature — automation, cookie robot, remote cookies
429	500 req/min rate limit, or too many concurrent launches
499	Free plan: three profiles already running

Rate-limit headers are read on every response; when fewer than 25 requests remain in the current minute, the tool result says so. Connection failures against the Local API explain the desktop-app and port requirements instead of returning a bare ECONNREFUSED.

Responses are capped at 60k characters — a page of 100 profiles carries a full fingerprint each, which would otherwise flood the context window.

Not covered

• POST /extensions/upload-zipped — multipart file upload. dolphin_request sends JSON only, so this endpoint is genuinely unreachable through this server. Use the app or a direct HTTP call.
• getFolder, getBrowserProfileStatus, the single-profile shareAccessToBrowserProfile, and the multi-profile local-storage export are reachable via dolphin_request — they were left out because a dedicated tool would duplicate one that already exists.

Real-world run

node examples/bot-detection-check.mjs

Drives a real Anty profile through bot.sannysoft.com and then a live DuckDuckGo search, using only MCP tools. Result: 58 detection tests, 0 failures or warnings.

✅ WebDriver (New)                missing (passed)
✅ WebDriver Advanced             passed
✅ Chrome (New)                   present (passed)
✅ Permissions (New)              prompt
✅ Plugins Length (Old)           5
✅ HEADCHR_UA / _CHROME_OBJ / _PERMISSIONS / _PLUGINS   ok
✅ WebGL Renderer  ANGLE (Intel, Intel(R) Iris(R) Xe Graphics …)

The interactive half found the search box by role from a snapshot, typed, submitted, and read the results back — which included API - Dolphin {Anty}. So CDP automation through this server does not break the profile's anti-detect properties.

Findings from a live build

Measured against Dolphin{anty} running Anty 150 on Windows 11, using temporary profiles.

wsEndpoint is a path, not a URL. The OpenAPI document says "Full ws:// URL" and gives ws://127.0.0.1:38927/devtools/browser/abc123 as its example. The actual response is {"port": 59618, "wsEndpoint": "/devtools/browser/8e0a4ca0-…"} — a bare path, matching Dolphin's own automation blog post rather than its spec. This server accepts either shape.

A nested fingerprint object produces a broken profile. The docs say you can pass the whole fingerprint to POST /browser_profiles and "the backend flattens its derived fields for you". It does not. The profile is created, but GET /browser_profiles/{id} and the Local API's start endpoint both then return HTTP 500. create_profile flattens it here instead, into the {mode, value} shape a profile actually stores:

useragent   {"mode":"manual","value":"Mozilla/5.0 …"}
cpu         {"mode":"manual","value":8}
webglInfo   {"mode":"manual","vendor":"Google Inc. (NVIDIA)","renderer":"ANGLE (NVIDIA, …)"}

A profile without spoofing-mode objects cannot launch. Create accepts a body with no webrtc, canvas, webgl, clientRect, timezone, locale, ports or geolocation and stores them as null. The profile reads back fine and then fails to start with HTTP 500. create_profile now sends the same defaults a UI-built profile carries (PROFILE_MODE_DEFAULTS in src/fingerprint.ts).

browser_version is required on /fingerprints/fingerprint, and there is no fallback. The spec marks it optional and says omitting it (or passing a version above stable) falls back to an internal default. Neither is true: omitting it returns HTTP 422 validation.required, and a too-high value returns HTTP 200 with an empty object. create_profile's default path was broken by this. It now discovers the dataset's current maximum by binary search and caches it (src/fingerprint-version.ts) rather than hard-coding a version that would rot — requesting a year-old Chrome is itself a fingerprinting signal. At the time of writing the dataset covers up to Chrome 150.

fonts silently does not persist. Sending a 214-entry fonts array stores []. Pairing that with fontsMode: "manual" yields a browser reporting zero fonts — a louder signal than not spoofing at all. Fonts are therefore left at Dolphin's auto, which is also what UI-built profiles use.

Headless leaks HeadlessChrome — but only on temporary profiles.

profile	headed	headless: true
temporary	Chrome/150.0.0.0	HeadlessChrome/150.0.0.0 ⚠️
saved (via create_profile)	Chrome/138.0.0.0	Chrome/138.0.0.0 ✅

Temporary profiles use default fingerprint preferences and carry no user-agent of their own, so the headless token shows through. A saved profile's manual user-agent overrides it — verified byte-identical in both modes. start_temporary_profile warns when headless is set; start_profile does not, because it does not need to.

navigator.webdriver is false and no cdc_/$cdc_ CDP artifacts are injected in either mode.

page.setContent fails on Anty's default page with a TrustedHTML error — its internal pages enforce Trusted Types. Navigate to a real URL instead. No tool here uses setContent.

Detaching does not kill the browser. browser.close() on a CDP-attached connection releases the client while Dolphin keeps the process alive, so browser_disconnect is safe and stop_profile remains the only thing that ends a session and syncs its data.

Tests

npm run build
npm test        # everything below
npm run smoke   # mock Local API, no app required
npm run e2e     # real Dolphin{anty}; skips itself if the app is not running

smoke runs the built server over stdio against a mock and asserts on the tool surface, routing, query serialization, error translation and input validation.

e2e starts a real temporary profile through the Local API and drives the actual Anty browser: navigate, snapshot, type, select, click, evaluate (page and element scope), scroll, tabs, screenshot, ambiguous-target error handling, and a real request to example.com. The fixture page is served locally so assertions are deterministic, but the browser under test is genuinely the one Dolphin launched.

test/challenge.e2e.test.js covers the handoff path and tab handling: each vendor's widget markup is detected, an ordinary page does not false-positive, browser_await_human returns as soon as a challenge clears (~6s, not the full timeout), it times out without looping, and a live Google reCAPTCHA demo page is recognised. It never attempts to solve one.

test/profile-lookup.e2e.test.js pins the name-resolution behavior against a live account: duplicate names are refused, the refusal is overridable, start_profile resolves a name to the existing id, and an unknown name fails without creating anything.

33 tests total, all passing. Run them serially — npm test sets --test-concurrency=1, because the two e2e files each launch a browser and collide over profile data directories in parallel.

Both API halves are now verified against a live account:

node examples/remote-check.mjs        # read-only sweep of the cloud endpoints
node examples/fingerprint-verify.mjs  # create → launch → assert fingerprint → clean up

remote-check confirms list_profiles, list_proxies, list_folders, list_statuses, get_fingerprint, get_useragent, list_fonts and list_team_users against real data.

fingerprint-verify creates a profile from a dataset fingerprint, launches it headless and headed, and asserts the spoof actually applied — user-agent, core count, memory, screen resolution and WebGL renderer all matched the requested values exactly. It deletes the profile it created.

Still unverified: cookie import/export, local storage, homepages, bookmarks, extensions, folder and team mutations. dolphin_request is the workaround if one of those has a field mismatch.

Local API session

Starting a saved profile needs the desktop app to hold a valid session. If start_profile returns HTTP 500 while start_temporary_profile works, run local_api_login — it stores your JWT in the app. Note that GET /v1.0/browser_profiles returning invalid session token is not a signal of this; that endpoint uses the app's own internal session and 401s regardless.