MCP 服务器

mcp-confidence

Enables LLM agents to route responses as accept, verify, or ask-a-human based on token logprobs, and provides an MCP server for delegating generation to local models with confidence bands.

README

<h1 align="center">mcp-confidence</h1>

A drop-in confidence gate for LLM agents. Turn any model's token logprobs into an accept / verify / ask-a-human routing decision — with honest, per-model calibration. Local & open-model first.

A language model can tell you how surprised it was by every token it just produced — that's what logprobs=True returns. mcp-confidence reads those numbers and turns them into a routing decision your agent can act on:

HIGH → auto-accept the model's output.
MID → verify (hand off to a stronger model or a supervisor check).
LOW → ask a human.

It's local- and open-model-first (vLLM, Ollama, llama.cpp, TGI, or any OpenAI-compatible endpoint), the core has zero third-party runtime dependencies, and it ships a one-command MCP server so a cloud "director" (e.g. Claude) can delegate generation to a local worker and get a confidence band back with every answer.

Why

The naive approach — "average the token probabilities, accept above 0.95" — is a weak and uncalibrated signal for open-domain free text, and quietly wrong on most models. High-frequency function words and MoE routing pull the per-token mean toward zero, so exp(mean_logprob) sits at 0.05–0.20 even for perfectly fluent output. A fixed probability threshold tuned on short structured outputs will reject good answers and accept bad ones once you point it at real prose.

mcp-confidence takes four deliberate positions to make the signal usable:

Band in mean-logprob (nats) space, not probability. Thresholds live in log space where the score actually separates, instead of an exp()-compressed [0, 1] that bunches everything near zero.
A weakest-link term with a floor. The score mixes the mean with the worst per-token logprob (min_weight=0.3 by default), clamped to a floor (-10.0) so one ultra-rare token — a numeric ID, an unusual name — can't collapse the score of an otherwise solid answer.
Per-model calibration tooling. Bundled risk-coverage analysis turns a log of real traffic into the thresholds your model needs, instead of you guessing again.
A 3-band decision, not a number. The output is a routing band you can branch on — accept, verify, or ask a human — with a conservative default: when logprobs are missing, the band is MID, never blind auto-accept.

The defaults are provisional guesses. HIGH=-1.5, LOW=-3.5 are starting points, not validated thresholds. Do not turn on auto-accept routing until you've recalibrated on your own model — see The honest part.

Install

pip install mcp-confidence

The core (gate, config, calibration, CLI, adapters) is pure stdlib — nothing else gets pulled in. Install extras only for what you use:

pip install "mcp-confidence[openai]"   # the OpenAI SDK, for live calls
pip install "mcp-confidence[mcp]"      # the MCP server (mcp + openai)
pip install "mcp-confidence[dev]"      # pytest + ruff

With uv:

uv pip install mcp-confidence
uv pip install "mcp-confidence[mcp]"

You don't need any extra to score logprobs you already have — only to fetch them from a live model or to run the server.

Quickstart

a) From a raw logprob list

If you already have a list of per-token logprobs, you don't need any extras or a network call:

from mcp_confidence import Gate, ConfidenceBand

gate = Gate()  # default thresholds
result = gate.from_logprobs([-0.2, -0.5, -0.1])

print(result.band)          # ConfidenceBand.HIGH
print(result.score)         # -0.337  (mean/min mix, in nats — not a probability)
print(result.mean_logprob)  # -0.267

if result.band is ConfidenceBand.LOW:
    ...   # ask a human
elif result.band is ConfidenceBand.MID:
    ...   # verify with a stronger model
else:
    ...   # HIGH — accept

ConfidenceResult is a frozen dataclass: score, band, mean_logprob, min_logprob, token_count, logprobs_available.

b) From an OpenAI chat completion

Call the API with logprobs=True, then hand the whole response to from_openai. It accepts both an SDK object and the raw JSON dict, and never raises on a malformed response — missing logprobs degrade to band MID.

from openai import OpenAI
from mcp_confidence import Gate, ConfidenceBand

client = OpenAI()
resp = client.chat.completions.create(
    model="gpt-4o-mini",
    messages=[{"role": "user", "content": "Capital of Australia?"}],
    logprobs=True,
    top_logprobs=5,
)

result = Gate().from_openai(resp)

if result.band is ConfidenceBand.LOW:
    escalate_to_human(resp)
elif result.band is ConfidenceBand.MID:
    verify_with_stronger_model(resp)
else:
    accept(resp)

c) Local model (vLLM / Ollama / llama.cpp / TGI)

Any OpenAI-compatible server works — it's the same from_openai path, you just swap base_url. This is the intended sweet spot: cheap local generation, with a confidence signal so you know when to escalate.

from openai import OpenAI
from mcp_confidence import Gate

# vLLM:   http://localhost:8000/v1      Ollama: http://localhost:11434/v1
client = OpenAI(base_url="http://localhost:8000/v1", api_key="not-needed")

resp = client.chat.completions.create(
    model="Qwen/Qwen3-30B-A3B",
    messages=[{"role": "user", "content": "Summarize this ticket."}],
    logprobs=True,
    top_logprobs=5,
)

result = Gate().from_openai(resp)
print(result.band.value, round(result.score, 3))

Tune the gate per model by passing a GateConfig to Gate(...), or load one from the environment:

from mcp_confidence import Gate, GateConfig

gate = Gate(GateConfig(high_threshold=-1.2, low_threshold=-3.0, min_weight=0.4))
# or, from MCP_CONFIDENCE_* env vars:
gate = Gate(GateConfig.from_env())

There's also a CLI for a quick sanity check — no extras required:

$ mcp-confidence score --logprobs="-0.2,-0.5,-0.1"
band         high
score        -0.3370
mean_logprob -0.2667
min_logprob  -0.5000
token_count  3

Add --config-from-env to apply MCP_CONFIDENCE_* thresholds instead of the defaults.

The honest part: calibrate before you trust it

Confidence thresholds are model-specific. A band that means "almost always right" on one model means "coin flip" on another. The shipped defaults are guesses; the only way to trust auto-accept routing is to calibrate on your own model's live output.

The workflow: log a JSONL row per generation carrying at least mean_logprob, score, band, and logprobs_available (an event field too, if you want to filter). When you can, add a human_label of "good" or "bad". Then point the calibrator at it:

mcp-confidence calibrate --audit confidence.jsonl --metric mean_logprob

That always prints two things. First, the distribution — where your traffic actually sits — plus the rate of calls where logprobs were unavailable (with a loud warning if it's over 20%, because the gate is blind on those):

worker_delegated events: 1240  |  logprobs unavailable: 31 (3%)

-- mean_logprob distribution (n=1209) --
  min  -6.412   p10 -3.880   p25 -2.910
  med  -1.740   mean -1.902
  p75  -0.980   p90 -0.520   max -0.090
  band split (current thresholds): high=505 (42%)  low=121 (10%)  mid=583 (48%)

Second, when your rows carry good/bad labels, a risk-coverage recommendation. It sweeps every observed value as a candidate (high, low) pair and picks the cell that minimizes "bad answers auto-accepted + good answers needlessly escalated," subject to your coverage constraints:

-- risk-coverage (metric=mean_logprob) --
  RECOMMENDED: high_threshold=-1.1  low_threshold=-3.4
    auto-accept coverage 58%  (bad slipped through: 4%)
    human-ask coverage  11%  (good needlessly asked: 6%)
  Set MCP_CONFIDENCE_HIGH_THRESHOLD / MCP_CONFIDENCE_LOW_THRESHOLD to these, then enable routing.

Tune the constraints with --min-accept-coverage (default 0.70) and --max-ask-coverage (default 0.15); calibrate on --metric score instead of mean_logprob if you prefer the combined score; use --event-name '*' to accept any row regardless of its event field. Without labels the recommendation is skipped and you pick conservative bands by eye from the distribution.

The same functions are importable and pure (no I/O) if you'd rather calibrate in a notebook:

from mcp_confidence.calibrate import load_events, distribution, risk_coverage

rows, total, unavailable = load_events("confidence.jsonl", event_name=None)
print(distribution(rows, "mean_logprob"))
print(risk_coverage(rows, "mean_logprob", min_accept_cov=0.70, max_ask_cov=0.15))

MCP server: the manager–worker pattern

A cloud director (Claude, say) is great at planning and owning the tool-call loop, but it has no logprobs of its own and is expensive for token-heavy grunt work. mcp-confidence ships an MCP server that lets the director delegate generation to a local worker over an OpenAI-compatible endpoint and get the text back with a confidence band attached — so it can decide to accept, verify, or ask a human.

The server runs the worker non-streaming with logprobs=True and top_logprobs=config.top_k, then computes the gate. Configure it entirely through the environment:

export MCP_CONFIDENCE_BASE_URL="http://localhost:8000/v1"   # your vLLM/Ollama/TGI worker
export MCP_CONFIDENCE_API_KEY="not-needed"
export MCP_CONFIDENCE_MODEL="Qwen/Qwen3-30B-A3B"
# optional gate overrides (after calibration):
export MCP_CONFIDENCE_HIGH_THRESHOLD="-1.1"
export MCP_CONFIDENCE_LOW_THRESHOLD="-3.4"

mcp-confidence serve            # stdio transport

{
  "mcpServers": {
    "confidence": {
      "command": "mcp-confidence",
      "args": ["serve"],
      "env": {
        "MCP_CONFIDENCE_BASE_URL": "http://localhost:8000/v1",
        "MCP_CONFIDENCE_API_KEY": "not-needed",
        "MCP_CONFIDENCE_MODEL": "Qwen/Qwen3-30B-A3B"
      }
    }
  }
}

The server exposes one tool:

generate_with_confidence(prompt: str, source: str = "") -> dict Generate text with the local worker and return it with a confidence band.

The returned payload is JSON-serializable and decision-ready:

{
  "text": "...the worker's answer...",
  "band": "high",
  "score": -0.94,
  "mean_logprob": -0.71,
  "min_logprob": -1.48,
  "token_count": 128,
  "logprobs_available": true,
  "should_verify": false,
  "should_ask_human": false
}

should_verify is true when the band is MID or logprobs were unavailable; should_ask_human is true when the band is LOW. A worker that doesn't emit logprobs degrades gracefully to MID with should_verify=true — the director is never told to blindly trust a blind signal.

The gate logic for this lives in a pure, dependency-free helper, mcp_confidence.mcp_server.build_confidence_payload(text, openai_response, config), so you can unit-test the whole decision with a dict fixture and no mcp/openai installed. import mcp_confidence.mcp_server never requires the extras — they're imported lazily inside run(), only when you actually serve.

How it compares

The closest existing package is llm-confidence (VATBox), which is good at what it does: deriving a confidence score per key in an OpenAI structured JSON output. mcp-confidence is aimed at a different problem — routing free-text generation, with calibration and a human-in-the-loop decision.

	`mcp-confidence`	`llm-confidence`
Primary target	Free-text / open-domain generation	OpenAI structured JSON outputs
Output	3-band routing decision (accept / verify / ask-a-human)	Per-key confidence scores
Scoring	Mean + weakest-link in logprob (nats) space, with a floor	Per-field probability aggregation
Calibration tooling	Yes — distribution + labeled risk-coverage sweep	Not included
Missing-logprobs handling	Conservative MID + `should_verify`	n/a
Local / open models	First-class (vLLM, Ollama, llama.cpp, TGI)	OpenAI-oriented
MCP server	Yes — manager–worker delegation	No
Runtime dependencies	Zero for the core	—

Different tools for different jobs: reach for llm-confidence when you're scoring fields of a JSON extraction; reach for mcp-confidence when you're deciding whether to trust, double-check, or escalate a generated answer.

Roadmap

Clearly future, not yet implemented:

Supervisor / verify MCP tool — a semantic groundedness check for the MID band (does the answer actually follow from the source?), so "verify" becomes an automated second opinion rather than just a flag.
Self-consistency sampling — use the top_logprobs already captured per token (currently untouched) to estimate agreement across alternatives.
Verbalized confidence — blend the model's own stated confidence with the logprob signal.
Learned calibrator — fit a small model on labeled audit logs instead of a single threshold pair.

Contributing

Most contributions will be adapters — teaching the gate to read logprobs from one more inference stack — or calibration corrections. A wrong confidence signal is worse than none, so corrections (a band that's miscalibrated, an adapter that misreads a real response, a docstring that overstates what a logprob can tell you) are the most valuable PRs here. Keep the core stdlib-only and every claim backed by a test. See CONTRIBUTING.md.

uv venv && uv pip install -e ".[dev]"
ruff check . && ruff format --check .
pytest -q