vcenter-mcp

A Model Context Protocol server that exposes VMware vCenter / ESXi VM lifecycle tools to Claude Code and other MCP clients. Built on pyVmomi.

What it does

• List VMs on a vCenter datacenter (grouped by host) or on a standalone ESXi host
• Create a VM (network-boot first; thin or thick provisioning; nested-virt option for ESXi targets)
• Power VMs on and off
• Delete VMs (powers off first if running, then destroys from disk)

Lookups accept either a display name or a moref ID (e.g. vm-42) — the moref path skips the inventory scan and is faster on large environments.

Prerequisites

• Python 3.10 or newer
• A vCenter Server or standalone ESXi host you can reach over the network
• A vSphere account with the privileges needed for whatever you plan to do (read-only is enough for list_vms; create / delete need the corresponding VM and resource-pool privileges)

Install

Install into a project-local virtualenv. Using a venv keeps vcenter-mcp and its dependencies (notably pyVmomi) isolated from your system Python.

From a clone of this repository:

python3 -m venv .venv
.venv/bin/pip install --upgrade pip
.venv/bin/pip install -e .

For development (also installs pytest):

.venv/bin/pip install -e ".[dev]"

Throughout this README, commands use .venv/bin/.... You can instead source .venv/bin/activate once per shell and drop the prefix — same result.

Configure a target

Run the interactive setup using the venv's Python:

.venv/bin/python -m vcenter_mcp setup

You'll be prompted for:

1. A target name (e.g. lab-vcenter) — used to refer to this target later
2. Host or IP of the vCenter / ESXi
3. Username and password
4. Target type: vcenter or esxi
5. (vCenter only) Datacenter and cluster names
6. Datastore name
7. One or more network profiles, each a name plus one or more portgroup names

The setup writes a config to ~/.config/vcenter-mcp/config.json (mode 0600). Re-run it any time to add another target or update an existing one.

Config file shape

{
  "default_target": "lab-vcenter",
  "targets": {
    "lab-vcenter": {
      "host": "vcenter.lab.example.com",
      "user": "admin@vsphere.local",
      "password": "...",
      "type": "vcenter",
      "datacenter": "Lab DC",
      "cluster": "Lab Cluster",
      "datastore": "datastore1",
      "networks": {
        "standard": ["VM Network"],
        "secure-boot": ["pg-secure-1", "pg-secure-2"]
      },
      "default_network": "standard"
    }
  },
  "templates": {
    "esxi":   { "cpu": 4, "ram_mb": 16384, "disk_gb": 100, "disk_provisioning": "thin", "guest_id": "vmkernel7Guest", "vhv": true },
    "ubuntu": { "cpu": 2, "ram_mb": 4096,  "disk_gb": 40,  "disk_provisioning": "thin", "guest_id": "ubuntu64Guest",  "vhv": false },
    "rhel":   { "cpu": 2, "ram_mb": 4096,  "disk_gb": 40,  "disk_provisioning": "thin", "guest_id": "rhel9_64Guest",  "vhv": false }
  }
}

A network profile is a list of portgroups; the first entry becomes the boot NIC. To add your own VM types, add entries to templates — vm_type strings passed to create_vm are matched against this dict.

Register with Claude Code

Register the MCP server using the venv's Python by absolute path. Claude Code launches the server in a fresh shell that does not inherit your activated venv, so the absolute path is required — pointing at a bare python here will fail to import vcenter_mcp.

VCENTER_MCP_DIR="$(pwd)"   # run this from the repo root, after install
claude mcp add --scope user vcenter -- "$VCENTER_MCP_DIR/.venv/bin/python" -m vcenter_mcp

Or just inline the absolute path you want:

claude mcp add --scope user vcenter -- /absolute/path/to/vcenter-mcp/.venv/bin/python -m vcenter_mcp

Read tools (list_vms) are safe to allow without prompting. Add it to permissions.allow in ~/.claude/settings.json:

{
  "permissions": {
    "allow": [
      "mcp__vcenter__list_vms"
    ]
  }
}

The destructive tools (create_vm, power_on_vm, power_off_vm, delete_vm) are intentionally not in the default allow-list — Claude will prompt you per call.

Tools

Tool	What it does
list_vms	List VMs on a target. vCenter targets group by host within a datacenter; ESXi targets list everything on the host.
create_vm	Create a VM that network-boots first. Pick a vm_type (template), optional CPU/RAM/disk overrides, optional network_profile.
power_on_vm	Power on a VM by display name or moref ID.
power_off_vm	Hard power off a VM by display name or moref ID.
delete_vm	Permanently delete a VM (powers off first if running, then destroys from disk).

Notes on TLS

vcenter-mcp connects with an unverified SSL context, which is the same default that govc and most pyVmomi sample code use because lab vCenters very commonly have self-signed certs. If your target uses a properly-signed certificate and you'd prefer real verification, swap _ssl_context() in src/vcenter_mcp/client.py.

Development

python3 -m venv .venv
.venv/bin/pip install -e ".[dev]"
.venv/bin/pytest

Tests run on Python 3.10, 3.11, and 3.12 in CI (see .github/workflows/test.yml).

License

Apache-2.0